Electrician Nunawading
Camma Electrical provides licensed electrical work for homes and businesses in Nunawading, from fault finding and power points to lighting, switchboard repairs and larger upgrades. A working electrician handles the job, explains the options clearly and completes the required safety paperwork where it applies. Camma Electrical holds REC 36165.
5.0★
Local rating
REC 36165
Licensed electrician
Fast
Local response
$20M
Public liability
Need An Electrician In Nunawading?
If you need electrical work in Nunawading, use a licensed electrician who can identify the cause of the issue and complete the work safely.
Electrical problems are not always obvious. A light that flickers, a power point that feels loose, a circuit breaker that trips or a new appliance that cannot be connected properly can all have different causes. The right fix starts with checking the circuit, the connections and the condition of the existing installation rather than guessing.
Camma Electrical helps Nunawading homeowners and local businesses with practical electrical work. That can mean a small repair, extra power where you need it, a lighting change, a safety concern, a switchboard issue or electrical work as part of a renovation. You will get a straightforward explanation of what has been found and what needs doing.
Camma Electrical is a Registered Electrical Contractor, REC 36165. Energy Safe Victoria licenses Victoria's electrical workers and maintains a Public Register of RECs, which you can search to find a registered electrical contractor in your area.
SendWork reports that, from 1 July 2026, an electronic Certificate of Electrical Safety for prescribed electrical work costs $39.70. Where a certificate applies, it is a job cost alongside the labour and materials needed to complete the work.
- Fault finding for tripping circuits, failed lights and loss of power
- Power points, switches and lighting installed or repaired
- Switchboard repairs and upgrade advice
- Kitchen, bathroom, laundry and renovation electrical work
- Commercial electrical repairs and fit-out work for local premises
Electrical Problems Should Not Be Put Off
A recurring electrical fault should be checked by a licensed electrician before it becomes a bigger disruption or safety concern.
Do not keep resetting a breaker just to get through the day. A breaker trips to protect the circuit, and the reason it tripped matters. The same applies to a burning smell, buzzing, warmth around a fitting, cracked outlets, shocks or a circuit that suddenly stops working. Turn the affected circuit off if it is safe to do so and arrange a licensed electrician.
Work For Homes And Local Businesses
The electrical work needed in a Nunawading home is often different from the work needed in a shop, office or workshop.
At home, the priority may be making an older layout more usable, improving lighting or checking a fault. In a business, downtime, safe access, equipment loads and customer areas may shape the job. In either setting, the work should suit the building and the way you actually use it.
Based In Nunawading, Working Across Melbourne's East
Camma Electrical is based in Nunawading, so jobs here are local work rather than a long drive across Melbourne.
Camma Electrical also works across the surrounding suburbs: Box Hill, Blackburn, Mitcham, Vermont, Ringwood, Doncaster, Glen Waverley, Mount Waverley and Wheelers Hill. If you are not sure whether your street is covered, get in touch and ask.
What Can A Nunawading Electrician Help With?
A Nunawading electrician can investigate faults, repair existing electrical components and install new electrical equipment as part of maintenance or improvement work.
A useful electrical visit is not limited to the item that first caught your attention. If a circuit is overloaded, a new outlet alone may not solve the problem. If a fitting has failed because of a connection issue, replacing the fitting without checking the connection can leave the cause behind.
The best approach is to describe what you have noticed, when it happens and what was running at the time. That gives the electrician a useful starting point and may reduce time spent tracing an intermittent problem.
- Indoor and outdoor lighting
- Additional power points and replacement switches
- Ceiling fans and appliance connections
- Smoke alarm electrical work
- Circuit breaker and safety switch concerns
- Data, power and lighting for business premises
Electrical Repairs And Fault Finding
Fault finding means tracing an electrical problem to its actual cause before deciding on the repair.
Some faults are simple, while others only appear when a certain appliance or circuit is in use. An electrician may need to test the circuit, isolate parts of the installation and inspect connected equipment. The goal is to repair the cause, not simply restore power for the moment.
Electrical Improvements For Older Homes
Electrical improvements can make an established home more practical without changing its character.
Older homes may have too few outlets in the rooms now used for working, charging devices or entertainment. New lighting, sensible outlet placement and a check of the switchboard can make day-to-day use easier. The right scope depends on the existing wiring, access above ceilings or below floors, and the demands of the new equipment.
Why Does My Circuit Breaker Keep Tripping?
A circuit breaker that keeps tripping needs investigation because it may be responding to a fault, an overloaded circuit or a problem with connected equipment.
A single trip after an unusual event is different from a circuit that trips repeatedly. Note which rooms or appliances lose power, whether it happens immediately or after a while, and whether rain, an appliance or recent work seems connected. This information helps narrow down the issue safely.
Do not replace a breaker, bypass a safety device or keep forcing power back on. Electrical work must be assessed and completed by a licensed electrician.
- A circuit may have too many high-demand appliances connected
- A damaged appliance or extension lead can affect the circuit
- A loose or damaged connection may cause an intermittent fault
- Moisture can affect outdoor equipment or wiring
- An older switchboard may need assessment before new loads are added
What To Do Before The Electrician Arrives
The safest preparation is to leave the affected circuit switched off if it will not stay on normally.
Make a short note of what happened before the trip and which appliances were connected. If you can do so safely, leave access clear to the switchboard and the affected rooms. There is no need to remove covers, pull apart fittings or test wiring yourself.
When A Tripping Circuit Is More Urgent
Burning smells, smoke, sparking, electric shocks or heat around electrical equipment need prompt professional attention.
Keep people away from the affected area and avoid using the circuit or appliance. If there is immediate danger, follow emergency service advice. For electrical repairs, a licensed electrician can assess the installation and explain the safe next step.
Do I Need A Switchboard Upgrade?
You may need switchboard work if your existing board is damaged, crowded, unreliable or unsuitable for the electrical load you now need.
A switchboard is where circuits are protected and controlled. It is not automatically necessary to replace one because it looks old, but condition and capacity matter. A proper assessment looks at the current equipment, the circuits serving the property and the work you are planning.
Switchboard work is often considered when adding major loads, renovating a kitchen, installing an EV charger or resolving recurring circuit issues. The electrician can explain whether a repair, additional protection, circuit changes or a larger upgrade is appropriate.
- Recurring circuit trips or unreliable power
- Visible damage, corrosion or signs of overheating
- A renovation requiring new circuits
- More electrical equipment than the property was set up for
- Planning for an EV charger or other higher-demand equipment
A Practical Example In Nunawading
A Nunawading household planning an EV charger and kitchen renovation should have the existing switchboard assessed before installation begins.
For example, the owner may first notice that the kitchen circuit trips when the kettle, microwave and dishwasher run together. Before new kitchen appliances and an EV charger are added, the electrician checks the switchboard, identifies the circuits involved and assesses how the proposed new loads can be supplied. The next step may be new circuits, switchboard changes or another suitable solution based on the inspection.
Repairs Versus A Full Upgrade
A switchboard repair can be enough when the fault is limited, while a broader upgrade may be needed when the board no longer suits the installation.
The decision should follow an inspection rather than a rule of thumb. Ask what has failed, what work is recommended now, what future work may require, and what options are available. Clear answers help you choose a sensible scope instead of paying for work that does not address the real issue.
Can You Add More Power Points And Lighting?
A licensed electrician can add power points and lighting where they are needed, provided the existing electrical installation can safely support the work.
Extra outlets can reduce reliance on power boards and extension leads in busy parts of a home. Good placement matters more than simply adding numbers. Consider where furniture sits, where devices are charged, where benches are used and which areas need practical light rather than harsh glare.
Lighting changes can be simple or part of a wider update. A new fitting may need a suitable support point, a new switch location or alterations to the circuit. The electrician can check access and explain what is involved before work starts.
- Kitchen bench and pantry lighting
- Home office power and lighting
- Garage, shed and workshop power
- Outdoor and garden lighting
- Replacement light fittings and switches
- Power points for TV, charging and bedside areas
Lighting That Suits The Room
The right lighting plan gives each room enough useful light for the way it is used.
Kitchens benefit from task lighting around work areas, while living areas often need flexible general lighting. Hallways, bathrooms, garages and outdoor areas each have their own practical needs. An electrician can discuss fitting positions, switching and what can be achieved with the existing wiring paths.
Avoid Overloading One Area
Adding outlets does not automatically increase the capacity available to that part of the property.
A room with several new outlets may still be served by an existing circuit with limits. This matters where heaters, cooking appliances, office equipment or chargers are used together. A licensed electrician can determine whether the existing circuit is suitable or whether the work needs a new or altered circuit.
Electrical Work For Nunawading Businesses
Nunawading businesses need electrical work that keeps the premises safe, practical and ready for normal trading.
A small electrical issue can affect staff, customers, lighting, equipment and access to parts of the premises. The starting point is understanding the problem and the building: what has failed, when it needs to be available, what equipment is connected and whether the work affects a tenancy, common area or fit-out.
Camma Electrical can assist with repairs, lighting changes, power outlets, fault finding and electrical work for business improvements. The scope should be planned around the specific premises, not copied from a generic office or retail checklist.
- Office and shop lighting
- Additional power for workstations and equipment
- Fault finding for circuits and fittings
- Electrical work during a commercial fit-out
- Switchboard repairs and circuit changes
- Maintenance repairs for business premises
Planning Electrical Work Around Your Premises
Electrical work in a business should be planned around access, equipment and the impact on trading.
A café, office, retail shop and workshop all use power differently. Before work begins, it helps to identify equipment that cannot be interrupted, areas customers use and any times when access is easier. This allows the electrician to discuss a practical way to complete the job.
Fit-Out And Alteration Work
Commercial alterations often need electrical changes to suit a new layout, new equipment or a different use of the space.
Moving desks, counters, display areas or equipment can mean power and lighting need to move too. The electrician can assess the current circuits and advise on the work required for a safe, usable result. Building approvals and other project requirements should be considered early where relevant.
Do I Need A Certificate Of Electrical Safety In Nunawading?
Some electrical work in Victoria requires a Certificate of Electrical Safety, and a licensed electrician can tell you whether it applies to your job.
A Certificate of Electrical Safety is a formal record connected with electrical work. It is not just paperwork to file away; it records important details of work that falls within the relevant requirements. Keep any certificate supplied with your property records, especially if the work forms part of a renovation or building project.
For building work, Whitehorse City Council says an owner needs to appoint a building surveyor before applying for a building permit. As Council does not currently offer a building permit service, the appointed private building surveyor will advise which documents are needed and carry out the relevant inspections.
- Ask whether the planned work requires a Certificate of Electrical Safety
- Keep electrical certificates with renovation and property records
- Discuss electrical work early if it is part of a building project
- Check permit and inspection requirements with the appointed building surveyor
Why Electrical Paperwork Matters
Electrical paperwork helps document completed work and can be important when a property is altered, sold or inspected later.
Keep certificates and invoices together with other building records. If another electrician needs to work on the property later, these records can provide useful context. If you are unsure whether earlier work was properly documented, raise it before starting the next stage of a project.
Choosing A Contractor You Can Check
You can check a Victorian electrical contractor through Energy Safe Victoria’s public register before engaging them.
You can search Energy Safe Victoria's Public Register of RECs to verify that Camma Electrical is licensed as REC 36165. Checking credentials is a sensible step before electrical work begins, particularly where the work affects safety, a renovation or a business premises.
What Happens When You Contact Camma Electrical?
When you get in touch, we will discuss the electrical issue or planned work and arrange for a licensed electrician to assess it.
Start by explaining what you need, where it is happening and whether there are any warning signs such as repeated tripping, heat, sparks or loss of power. Photos can sometimes help for visible items such as a switchboard, light fitting or damaged outlet, but do not remove covers or investigate wiring yourself.
At the visit, the electrician will inspect the relevant area, talk through what has been found and explain the practical options. If the work needs further parts, access, coordination with other trades or a larger scope, that will be discussed before you decide how to proceed.
- Tell us what is happening and when you first noticed it
- Mention any recent renovation, new appliance or repeated circuit trip
- Keep access clear to the switchboard if possible
- Ask questions about the cause, recommended work and next steps
- Receive the relevant electrical documentation when it applies
A Clear Scope Before Work Starts
You should know what electrical work is recommended and why before making a decision.
Some jobs can be resolved during the initial visit, while others need further investigation, materials or planning. The electrician will explain the issue in plain language and outline the next sensible step. There is no benefit in dressing up a simple repair or pretending a complex fault has an instant answer.
Licensed Electrical Work You Can Rely On
Camma Electrical provides electrical work through a licensed Registered Electrical Contractor, REC 36165.
Whether the job is a failed light, an added outlet, a switchboard concern or a business repair, the aim is the same: safe work, clear communication and a result that suits the property. Get in touch to discuss electrical work in Nunawading.
CLIENT REVIEWS
WHAT CLIENTS SAY
26 reviews on Google →
Common Questions
How much does an electrician cost in Nunawading?
The cost depends on the type of work, the time needed to diagnose or complete it, access to the area and any materials required. A simple replacement is different from fault finding, new circuits or switchboard work. Describe the job clearly when you get in touch so the electrician can explain what needs inspection before a proper scope is confirmed.
How long does an electrical repair take?
Some repairs can be completed in one visit, while faults or larger upgrades can take longer depending on the cause and the work required. A failed fitting may be straightforward, but a circuit that repeatedly trips can need testing to locate the problem. Access, replacement parts and the condition of existing wiring also affect the time involved.
Do I need a licensed electrician to replace a power point?
Yes, electrical work such as replacing or installing a power point should be done by a licensed electrician. A power point connects to fixed wiring, and incorrect work can create shock, fire and compliance risks. Do not remove the cover or attempt the replacement yourself. A licensed electrician can inspect the outlet and complete the work safely.
What should I do if my power keeps tripping?
Leave the affected circuit off if it will not remain on, avoid using suspect appliances and arrange a licensed electrician to investigate. Take note of what was running when the trip occurred and which part of the property lost power. Do not repeatedly reset the breaker, bypass it or try to repair the switchboard yourself.
Is a switchboard upgrade worth it?
A switchboard upgrade can be worthwhile when the existing board is unsafe, unreliable or unable to support planned electrical work. It is not something to approve based on age alone. An electrician should inspect the board, explain the issue and advise whether a targeted repair, new circuits or a broader upgrade is the appropriate solution.
Sources
- Energy Safe Victoria — Energy Safe Victoria is Victoria’s electrical safety regulator and maintains a public register for checking electrical workers and contractors.
- Whitehorse City Council — For building work, Whitehorse City Council says an owner appoints a private building surveyor rather than the council issuing the building permit directly.
- SendWork — From 1 July 2026, the ESV Certificate of Electrical Safety fee for prescribed electronic work is $39.70.
Need electrical work in Nunawading? Get in touch to discuss the job with a licensed electrician.
Get a free, no-obligation quote from your local licensed electrician.